If your controller is GCode, Ruida, Trocen, or TopWisdom based, even if it's not listed it might be supported already - Download the free trial and try it for yourself. More controllers will be added soon, so if you don't see yours listed, send us a message - maybe we're already working on it! Supported Trocen controllers include the AWC708C, AWC608, and TL-3120. Supported Ruida controllers include the RDC6442G/S, RDC6445G, RDC6332G, RDLC-320A, and R5-DSP. Supported GCode controllers,include Grbl, Smoothieware, Grbl-LPC, and Marlin.
We currently support most Ruida, Trocen, TopWisdom, and GCode based controllers. As always, powering the electronics down and restarting them often helps clear odd issues as well.LightBurn talks directly to your laser, without the use of additional software.A good thing to look at is to check the firmware to make sure it's up to date.Sometimes I just use Creative space to get a starting point for my settings to use in Lightburn. Creative space is excellent for the easy stuff, Lightburn is better for the difficult projects. I bounce between the two depending on the project. Being fiddly is to be expected from a professional product, the access to more advanced features means more ways to cause problems but also do things otherwise unobtainable. I also use Lightburn ( the test grid looks like it's from Lightburn ) but I've found the controls to be a little more fiddly and I've had to reload the driver a couple times. I assume this is a safety feature but it's caught me a few times. If you're using a user-defined material it sets the output power to 1% by default which obviously isn't enough power to even activate the laser. Another thing to check is the setting in xTool Creative space.If it's not in focus then it will just burn everything and not cut or engrave as expected. Make sure the laser is in focus to the material with the arm that folds down from the laser.
A few of things you may want to double check.
0 kommentar(er)
